How to use the hand-rolled vacuum compression bag

1. Before putting the clothing quilt into the compression bag, dry the clothing quilt first, and then fold it into a shape that is convenient for storage. Put it in the bag as much as possible, at least a few centimeters away from the sealing zipper.
2. Before closing the zipper, check whether the zipper sealing part is clean and whether there are fine fibers or dust (small fibers or dust may reduce the sealing performance of the compression bag and cause the compression bag to leak. If there is, please wipe it with a rag with water.
3.Install the sliding piece, press the sliding piece zipper with your left hand, slowly and lightly pull to the other end of the zipper, press the sliding piece with your hand and slide it back and forth on the zipper several times to ensure that the zipper is really sealed.
4. Curl and press to discharge the air, slowly roll up and squeeze from the zipper end of the compression bag by hand, and use the air to discharge from the bag.
5. Repeat several times until the air is exhausted, and then level the bag.

6. Open the closed zipper and take out the clothing and quilt to dry, and then it can be restored to its original state.