How to use the compressed bag

1. Before putting the clothing quilt into the compression bag, dry the clothing quilt first, and then fold it into a shape that is convenient for storage. Put it in the bag as much as possible, at least a few centimeters away from the sealing zipper.

2. Check whether the sealing part of the zipper is clean before closing the zipper. Whether there are fine fibers or dust. Small fibers or dust may reduce the sealing performance of the compression bag and cause the compression bag to leak. If there is any, please wipe it with a water-soaked cloth. .

3. Install the sliding piece, press the sliding piece zipper with your hand, and slowly and lightly pull it toward the other end of the zipper. When it reaches two-thirds, squeeze or fold the clothes or quilt to make most of it. After the part of the air is discharged, quickly use the sliding piece to pull up the remaining third part (this saves a lot of time and effort when using a manual pump to pump air).

4. Press the sliding piece with your hand and slide it back and forth on the zipper several times to ensure that the zipper is really sealed.

5. Use a manual air pump to pump air: open the air nozzle cover, align the air pump at the air nozzle, and pull the piston to pump air (when pumping large-capacity bags, the pumping time is a little longer, so you don’t need to take out the pump and cover the lid when you are resting. , The gas will not be sucked back).

6. Use a vacuum cleaner to extract air: Open the air nozzle cover and align the suction tube of the vacuum cleaner at the air nozzle. Open the vacuum cleaner to quickly draw air and compress.